HP XP P9500 Storage - Manual (Page 218)

To register an HDLM device:
1
.
Make sure that VxVM recognizes HDLM devices.
Execute the following commands sequentially to check whether VxVM
recognizes HDLM devices.
¢
The dlnkmgr command's view -path operation
Check the HDLM devices that must be recognized by VxVM. The
following shows an example of executing the command:
The following describes the procedure for checking whether the
shaded HDLM devices are recognized.
¢
vxdisk command
Make sure that the devices are recognized by VxVM. The following
shows an example of executing the command:
If a device name of an enclosure (HDS9980V0_1) is displayed in the
DEVICE column for the device, execute the following command to check
the device name, in the format cUtXdYsZ, corresponding to the device
name of the enclosure.
3-152
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide for Solaris ®