HP XP P9500 Storage User Manual
Page 302
> ### Device=ssd83 target=134012 lun=3
> ### Path=/pci@8,700000/SUNW,emlxs@1/fp@0,0/
ssd@w50060e80033a9939,3
Execution example after a path is added by the addition of a CHA port:
Check that a path for the same CHA port has been added:
26a31,32
> ### Device=ssd119 target=134012 lun=2
> ### Path=/pci@8,700000/SUNW,emlxs@1,1/fp@0,0/
ssd@w50060e80033a9939,2
28a35,36
> ### Device=ssd84 target=134012 lun=2
> ### Path=/pci@8,700000/SUNW,emlxs@1/fp@0,0/
ssd@w50060e80033a9939,2
34a43,44
> ### Device=ssd118 target=134012 lun=3
> ### Path=/pci@8,700000/SUNW,emlxs@1,1/fp@0,0/
ssd@w50060e80033a9939,3
36a47,48
> ### Device=ssd83 target=134012 lun=3
> ### Path=/pci@8,700000/SUNW,emlxs@1/fp@0,0/
ssd@w50060e80033a9939,3
16
.
To remove an LU from HDLM management, use a text editor to edit the
HDLM driver unconfiguration definition file (/opt/DynamicLinkManager/
config/dlmfdrv.unconf).
In the lines that define the LU that is to be removed from HDLM
management, delete the hash mark (#) in front of the LDEV property
line. Do not change anything else.
17
.
To remove an LU from HDLM management, apply the contents of the
HDLM driver unconfiguration definition file to the HDLM driver
configuration definition file.
Use the following command to apply the settings in the HDLM driver
unconfiguration definition file (/opt/DynamicLinkManager/config/
dlmfdrv.unconf) to the HDLM driver configuration definition file (/
kernel/drv/dlmfdrv.conf):
# /opt/DynamicLinkManager/bin/dlmsetconf -u
18
.
When you use VxVM, from VxVM, disable the devices that you do not
need to access.
Specify settings as shown in
Removing Devices from VxVM on a Controller
or
Removing Devices From VxVM on a Path Basis on
Removing Devices from VxVM on page 3-154
19
.
Restart the host, with the reconfiguration option specified.
Execute one of the following commands:
¢
# reboot -- -r
4-40
HDLM Operation
Hitachi Dynamic Link Manager User Guide for Solaris
®