HP XP P9500 Storage - Manual (Page 430)

Output directory #1 Files Explanation
SC3.0_dev_did_rdsk.txt List of directories and files
in the /dev/did/rdsk
directory
etc/cluster
#6 All directories and files in
the /etc/cluster
directory
Cluster configuration
information for Sun
Cluster
#1
An output directory is created in the specified directory when you extract
the getras.tar.Z file.
#2
The value N depends on the setting in the dlmwebagent.properties file.
The default value is 2.
#3
The file might not be created depending on the device managed by HDLM.
#4
In the actual file name, a file number is appended to Trace-file-prefix
specified-in-the-Hitachi-Network-Objectplaza-Trace-Library-utility2. For
example, the default will be hntr21.log to hntr216.log. Note that the 2
following the integrated trace file prefix does not represent a file number.
#5
This setup file is for VCS version 5.0. This information is collected only if
the file exists.
#6
This information is collected only if the software for which information is
to be collected is installed.
The dlmcfgmgr Utility for Managing the HDLM Configuration
This utility makes the HDLM driver recognize the contents of the HDLM driver
configuration definition file (/kernel/drv/dlmfdrv.conf) dynamically
without restarting the host. The following table lists the operations to be
performed and not to be performed.
Table 7-2 Configuration Changes Applicable and Not Applicable to the
dlmcfgmgr Utility for Managing the HDLM Configuration
Applicable operation Inapplicable operation
• Adding a new LU
• Managing the LU that has been
removed from HDLM management
• Adding a path #
• Deleting an existing LU (in Solaris 8 or
Solaris 9)
7-16
Utility Reference
Hitachi Dynamic Link Manager User Guide for Solaris ®