HP XP P9500 Storage - Manual (Page 258)

Settings Needed After HDLM Removal
VxVM Settings
When using VxVM, execute the following command to confirm that the
DEVICE column of the LUs previously managed by HDLM is displayed in the
cWtXdYsZ format (for example, c6t0d10s2):
# vxdisk list
If the value is displayed in the cWtXdYsZ format, perform the following
procedures:
1
.
Delete the /etc/vx/disk.info file.
2
.
Restart the host, or restart the VxVM configuration daemon by executing
the following command:
# vxconfigd -k
In HDLM 05-00 or later, VxVM disk groups that were used with HDLM devices
can still be used after removal. To use such disk groups, perform the
following procedure after removing HDLM.
To use VxVM's disk groups that were used with HDLM devices in
HDLM 05-00 or later:
1
.
Execute the following command to import the disk group:
# vxdg import disk-group-name
2
.
To use a volume that belongs to a disk group, execute the following
command to activate the volume:
# vxvol -g disk-group-name startall
SDS Settings
Create meta devices. For details, refer to the SDS documentation.
SVM Settings
Create volumes. For details, refer to the SVM documentation.
Sun Cluster Settings
After restarting the host, perform steps 1 to 4 on all nodes.
When setting Quorum devices, perform step 5.
When setting a disk device group, perform step 6.
3-192
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide for Solaris ®