HP XP P9500 Storage - Manual (Page 497)

KAPL05001 to KAPL06000
Message
ID
Message Text Explanation
KAPL05003
-I
The HDLM driver (filter component)
was successfully attached to Disk
(aa...aa), Partition (bb...bb).
Details
The path for the disk and
partition was registered
successfully in the core logic.
aa...aa: minor number of the sd
or ssd device (decimal number)
bb...bb: slice number
Action
None.
KAPL05008
-E
Could not allocate memory.
(aa...aa:bb...bb) Execute the
DLMgetras utility to collect error
information, and then contact your
vendor or maintenance company.
Refer to the HDLM User's Guide for
instructions how to execute the
DLMgetras utility.
Details
The OS memory reservation
function started but returned an
error.
aa...aa: File ID, line number
(hexadecimal number)
bb...bb: Target memory size
(hexadecimal number)
Action
Check whether the HDLM driver
has started normally. If it has
not started or contains an error,
execute the DLMgetras utility for
collecting HDLM error
information, and then contact
your HDLM vendor or the
maintenance company if there is
a maintenance contract for
HDLM. For details on the
DLMgetras utility, see
The
DLMgetras Utility for Collecting
HDLM Error Information on page
7-3 .
KAPL05011
-E
Could not attach the HDLM driver
(filter component) to Disk (aa...aa),
Partition (bb...bb). (cc...cc:dd...dd)
Execute the DLMgetras utility to
collect error information, and then
contact your vendor or maintenance
company. Refer to the HDLM User's
Guide for instructions how to
execute the DLMgetras utility.
Details
An attempt to register the path
for the disk and partition into the
core logic has failed.
aa...aa: Minor number of the sd
or ssd device (decimal number)
bb...bb: Slice number (decimal
number)
cc...cc: Error code (hexadecimal
number)
dd...dd: Address of table for
managing the HDLM filter driver
(hexadecimal number)
Action
Messages
8-41
Hitachi Dynamic Link Manager User Guide for Solaris ®