HP XP P9500 Storage - Manual (Page 107)

¢
SVS is an HDLM management-target device.
¢
You are upgrading from HDLM 5.6.1 or earlier.
When both these conditions are satisfied, the previous generation of the
HDLM driver configuration definition file (/kernel/drv/
dlmfdrv.conf.bak) and HDLM driver unconfiguration definition file (/
opt/DynamicLinkManager/config/dlmfdrv.unconf.bak) are also
updated. For details about the dlmfdrv.conf.bak and
dlmfdrv.unconf.bak files, see Note in section
Parameters on page
7-24 .
If both the conditions above are satisfied, the following files are also
created:
¢
/kernel/drv/dlmfdrv.conf_oldbackup
Backup of the dlmfdrv.conf file before the upgrade installation
¢
/kernel/drv/dlmfdrv.conf.bak_oldbackup
Backup of the dlmfdrv.conf.bak file before the upgrade installation
¢
/opt/DynamicLinkManager/config/dlmfdrv.unconf_oldbackup
Backup of the dlmfdrv.unconf file before the upgrade installation
¢
/opt/DynamicLinkManager/config/dlmfdrv.unconf.bak_oldbackup
Backup of the dlmfdrv.unconf.bak file before the upgrade
installation
• If you newly install HDLM after removing HDLM 03-02, the format of the
logical device file name of the HDLM device will change from chWtXdYsZ
to cUtXdYsZ. For details on the elements of cUtXdYsZ, see Logical
Device Files for HDLM Devices on page 2-9 .
• In HDLM 5.6 or later, trace files for versions of HDLM earlier than 5.6 are
divided into integrated trace files and trace files. The logs for the HDLM
command (dlnkmgr)operation is output to integrated trace files. Trace
information for an HDLM manager is output to trace files. The output
destinations for the files are changed as follows:
When you install HDLM 5.6 or later after removing HDLM 04-00 or earlier
Trace files before removal:
/opt/hitachi/HNTRLib/spool/hntrn.log (n indicates a file number)
Integrated trace files after re-installation:
/var/opt/hitachi/HNTRLib2/spool/hntr2n.log (n indicates a file
number)
Trace files after re-installation:
/var/opt/DynamicLinkManager/log/hdlmtrn.log (n indicates a file
number)
When you re-install HDLM 5.6 or later after removing HDLM 04-01, or
when you perform an upgrade installation from HDLM 05-00 or later
Trace files before removal:
/var/opt/hitachi/HNTRLib2/spool/hntr2n.log (n indicates a file
number)
Integrated trace files after upgrade installation or re-installation:
Creating an HDLM Environment
3-41
Hitachi Dynamic Link Manager User Guide for Solaris ®