HP XP P9500 Storage - Manual (Page 249)

For details on how to remove the VCS settings, refer to the VCS
documentation.
Remove VxVM Settings
If you are using both HDLM and VxVM on the same host, before you remove
HDLM, perform the following to delete the HDLM devices from VxVM.
Note
If you are using Sun Cluster, before deleting HDLM devices from VxVM,
remove the settings for the disk device group (see Remove Sun Cluster
Settings on page 3-180 of Preparations for HDLM Removal on page
3-179 ).
For HDLM version 04-01 or earlier:
1
.
Execute the following command to unmount the file systems on which the
VxVM volumes are mounted:
# umount mount-point
2
.
Execute the following command to delete all VxVM volumes:
# vxedit -r -f rm volume-name
3
.
Execute the following command to delete all disk groups:
# vxdg destroy disk-group-name
4
.
Execute the following command to delete all HDLM devices:
# vxdisk rm chWtXdYsZ
For HDLM version 05-00 or later
1
.
Execute the following command to deactivate all volumes used in VxVM:
# vxvol -g disk-group-name stopall
The deactivated volumes become unavailable.
2
.
When there is already a created disk group, execute the following
command to deport the disk group:
# vxdg deport disk-group-name
3
.
To enable VxVM management, delete the entries for sd or ssd devices and
the entries for HDLM devices from the /etc/vx/vxvm.exclude file.
After removing HDLM, the VxVM volumes that were used with HDLM devices
can be used with sd or ssd devices. For details, see VxVM Settings on page
3-192 of Settings Needed After HDLM Removal on page 3-192 .
Remove SDS Settings
If you are using SDS, before you remove HDLM, perform the following to
delete the registration of HDLM devices from SDS.
Note
Deleting a metadevice deletes data in the metadevice. Make sure that you
first back up the data.
Creating an HDLM Environment
3-183
Hitachi Dynamic Link Manager User Guide for Solaris ®