HP XP P9500 Storage - Manual (Page 483)

Message
ID
Message Text Explanation
Use the view operation of the
HDLM command (dlnkmgr) to
check the setting for storage and
LUs. For details on the view
operation, see view (Displays
Information) on page 6-32 .
KAPL01157
-I
The dynamic I/O path control
function was set to aa...aa for the
system.
Details
aa...aa: "on" or "off"
Action
Use the view operation of the
HDLM command (dlnkmgr) to
check the setting for the host,
storage, and LUs. For details on
the view operation, see view
(Displays Information) on page
6-32 .
KAPL01158
-E
Dynamic I/O path control cannot be
applied to the specified storage.
Action
Use the view operation of the
HDLM command (dlnkmgr) to
check the path ID. For details on
the view operation, see view
(Displays Information) on page
6-32 .
KAPL01159
-I
Paths were added. (number of
paths added = aa...aa, completion
time = bb...bb)
Details
This message indicates that an
add operation succeeded.
aa...aa: number of paths added
bb...bb: year (4 digits)/month/
date hour:minute:second
Action
Use the view operation of the
HDLM command (dlnkmgr) to
verify information about the
added paths.
KAPL01160
-W
The path configuration was not
changed.
Details
This message indicates that no
paths were added.
Action
¢
Execute an OS command,
and check whether the
addition of paths is
recognized by the OS.
¢
Use the view operation of the
HDLM command (dlnkmgr) to
check whether the paths
have already been added to
HDLM.
Messages
8-27
Hitachi Dynamic Link Manager User Guide for Solaris ®