HP XP P9500 Storage - Manual (Page 406)

Item Description
which case you should check the status of individual paths and
take appropriate action for any paths that have an error status.
Example
The following shows the subsequent sub-parameters:
-srt cp
Sorts the CHA port information by the storage system model IDs
(Product), storage system serial numbers (S/N), and CHA port
numbers (ChaPort).
-t
Omits the title for each information item.
To display corresponding information about an HDLM device, sd or ssd device,
and LDEV
-drv
Displays the information about the PathID, the HDLM device, the sd or
ssd device for the HDLM device, and the LDEV (the LU in the storage
system).
For details on the contents of each display item, see
Table 6-20 To
Display Corresponding Information About an HDLM Device, sd or ssd
Device, and LDEV on page 6-66 .
-t
Omits the title for each information item.
Table 6-20 To Display Corresponding Information About an HDLM
Device, sd or ssd Device, and LDEV
Item Description
PathID AutoPATH_ID, indicated by a decimal number.
AutoPATH_ID is assigned when the host is restarted.
When a new LU was added and the host has not been
restarted, AutoPATH_ID is re-assigned to each path of the
LU when you execute the dlmcfgmgr utility for managing
the HDLM configuration.
HDevName Host device name.
The name of the logical device file (minus the slice
number, in cUtXdY format) for the HDLM device
6-66
Command Reference
Hitachi Dynamic Link Manager User Guide for Solaris ®