HP XP P9500 Storage - Manual (Page 233)

Figure 3-29 The /etc/vx/vxvm.exclude file (before editing)
Figure 3-30 The /etc/vx/vxvm.exclude file (after editing)
Among the non-HDLM devices in the ENABLED state, there might be two or
more devices whose tXdY portions in the logical device file name
(cUtXdYs2 format) are the same. In this case, change the currently
assigned controller number in /etc/vx/vxvm.exclude.
5
.
After modifying all the sd or ssd device entries that have not been
suppressed in /etc/vx/vxvm.exclude, execute the vxdctl command to
restart the VxVM daemon.
The following shows an example of executing the command:
# vxdctl enable
6
.
Execute the vxdmpadm command, specifying a device output by the
vxdisk command, to check whether the device has been removed from
VxVM.
Creating an HDLM Environment
3-167
Hitachi Dynamic Link Manager User Guide for Solaris ®