beautypg.com

HP XP P9500 Storage User Manual

Page 399

background image

Displayed item

Description

No summary

displayed

Summary

displayed

Serial
number

S/N

Serial number of the storage system

LUs

Total number of LUs managed by HDLM among the

LUs in the storage system

Dynamic I/O
Path
Control

-

The setting information about the dynamic I/O path

control function is displayed for each storage

system.
on: The dynamic I/O path control function is

enabled.
off: The dynamic I/O path control function is

disabled.
-: The dynamic I/O path control function is not

supported.
If an LU whose settings differ from the settings

based on the system storage unit is included, an

asterisk (*) is added after the on or off being

displayed.

iLU

LU number of the storage system.
This number combined with the storage system

name (shown in DskName) identifies the LU that is

accessed by a path.

For the Lightning 9900 Series, Lightning 9900V

Series, Hitachi NSC55, Hitachi Universal

Storage Platform 100, Hitachi Universal Storage

Platform 600, Hitachi Universal Storage

Platform 1100, or HUS VM, indicated by a

hexadecimal number. The first two characters

of iLU are the CU number, and the last two

characters are the internal LU number within

the CU.

For XP10000/XP12000, P9500, or SVS,

indicated by a hexadecimal number. The first

three characters of iLU are the CU number, and

the last two characters are the internal LU

number within the CU. The first character of the

CU number is the value 0.

For the Thunder 9500V Series, Hitachi 2000/

AMS/WMS/SMS series, or HUS100 series

indicated by a decimal number. The entire

value of iLU is the internal LU number within

the storage system. You can identify an actual

LU by referencing iLU from the storage system

management program.

For Universal Storage Platform V/VM series, or

Hitachi Virtual Storage Platform indicated by a

hexadecimal number. The first two characters

of iLU are the number of the logical DKC (Disk

Controller), the middle two numbers are the CU

Command Reference

6-59

Hitachi Dynamic Link Manager User Guide for Solaris

®

This manual is related to the following products: