HP XP P9500 Storage - Manual (Page 377)

Parameter
and program
information
to be
displayed
Item Description
When automatic failback is off, intermittent error
monitoring is disabled although Intermittent
Error Monitor will be shown as on. When the
automatic failback function is on, intermittent
error monitoring will be enabled.
• Intermittent error monitoring interval and
number of times that the error needs to occur
When intermittent error monitoring is on, the
specified intermittent error monitoring interval
and number of times that the error needs to
occur are displayed within the parentheses
following on. The format is number-of-times-
error-is-to-occur/monitoring-interval. The time is
in minutes.
Dynamic I/O
Path Control Setting status of the dynamic I/O path control
function
•
Setting status
on: Enabled off: Disabled
• Checking interval
The parentheses following the setting status
shows the checking interval for reviewing
information about the switching of controllers
performed by the storage system. "Minute" is
used as the unit.
If different settings have been specified for each
storage system or LU, an asterisk (*) is added
after the parentheses in which the checking
interval is displayed.
-msrv
Information
about the
HDLM
manager
HDLM Manager Status of the HDLM manager:
Alive: Normal
Dead: Stopped
Ver Version number of the HDLM manager
WakeupTime Startup time of the HDLM manager
-adrv
Information
about the
HDLM alert
driver
HDLM Alert
Driver Status of the HDLM alert driver:
Alive: Normal
Dead: Stopped
Ver Version number of the HDLM alert driver
WakeupTime Startup time of the HDLM alert driver
ElogMem Size Size of error log memory for the HDLM alert driver in
kilobytes
-pdrv HDLM Driver Status of the HDLM driver:
Alive: Normal
Command Reference
6-37
Hitachi Dynamic Link Manager User Guide for Solaris ®