HP XP P9500 Storage - Manual (Page 490)

Message
ID
Message Text Explanation
HDLM manager could not start
normally because it was unable
to open the option definition file.
aa...aa: Option definition file
name
Action
Check whether another program
is currently using this file (for
example, the file is being opened
in a text editor), or whether the
file has been inadvertently
deleted.
KAPL04009
-E
The option definition is invalid. Details
HDLM manager could not start
normally because some of the
definitions in the option definition
file were invalid.
Action
If the KAPL04033-W message is
output after this message,
execute the dlnkmgr view -sys
-sfunc command, and then
check the option settings.
Use the dlnkmgr set operation
to return options settings back to
where you had them.
If the KAPL04033-W message is
not output, restart HDLM
manager.
If the same error occurs, re-
install HDLM.For details on the
view operation, see
view
(Displays Information) on page
6-32 . For details on the set
operation, see set (Sets Up the
Operating Environment) on page
6-17 .
KAPL04010
-E
Could not open the error log file. Details
HDLM manager cannot start
normally (unable to open the
error log file /var/opt/
DynamicLinkManager/log/
dlmmgr[1-16].log).
Action
Check whether another program
is using the file (for example, the
file is being opened in a text
editor), or whether the error log
file has been inadvertently
deleted.
8-34
Messages
Hitachi Dynamic Link Manager User Guide for Solaris ®