HP XP P9500 Storage - Manual (Page 301)

# /opt/DynamicLinkManager/bin/dlmsetconf
The KAPL10242-I message appears when you execute the dlmsetconf
utility. Type y in response.
15
.
Execute the following command to compare the HDLM driver
unconfiguration definition file before and after execution of the
dlmsetconf utility:
# diff dlmfdrv.unconfbakn dlmfdrv.unconf
Compare the old and new files to make sure that the reconfigured
environment is recognized by HDLM. An example is shown below.
Execution example after an HBA is replaced:
Check that all paths for the same type of HBA device have been
deleted from the shaded portion, and that a path indicating the same
type of HBA device has been added in the part after the shaded
portion.
Execution example after a path is added by the addition of an HBA port:
Check that a path for the same HBA port has been added:
36a41,44
> ### Device=ssd74 target=65664 lun=2
> ### Path=/pci@8,700000/SUNW,emlxs@1/fp@0,0/
ssd@w50060e80033a9938,2
> ### Device=ssd84 target=134012 lun=2
> ### Path=/pci@8,700000/SUNW,emlxs@1/fp@0,0/
ssd@w50060e80033a9939,2
52a61,64
> ### Device=ssd73 target=65664 lun=3
> ### Path=/pci@8,700000/SUNW,emlxs@1/fp@0,0/
ssd@w50060e80033a9938,3
HDLM Operation
4-39
Hitachi Dynamic Link Manager User Guide for Solaris ®