HP XP P9500 Storage - Manual (Page 371)

Specifies the checking interval (in minutes) for reviewing information
about switching of controllers performed by the storage system which is
used in the dynamic I/O path control function. Specify a value in the
range from 1 to 1440. The default value is "10".
-s
Executes the command without displaying the message asking for
confirmation of command execution from the user. Specify this parameter
if you want to skip the response to the confirmation message. For
example, when you want to execute the command in a shell script or
batch file.
To display the format of the set operation
-help
Displays the format of the set operation.
Example
# /opt/DynamicLinkManager/bin/dlnkmgr set -help
set:
Format
dlnkmgr set { -lb on [ -lbtype { rr | exrr | lio | exlio
| lbk | exlbk } ]
| -lb off
| -ellv ElogLevel
| -elfs ElogFileSize
| -elfn Number-Of-ElogFiles
| -systflv TraceLevel
| -systfs TraceFileSize
| -systfn Number-Of-TraceFiles
| -pchk on [ -intvl Interval-Time ]
| -pchk off
| -afb on [ -intvl Interval-Time ]
| -afb off
| -iem on
[ -intvl Error-Monitor-Interval ]
[ -iemnum Number-Of-Times ]
| -iem off
| -lic
| -audlog on
[ -audlv AudlogLevel ]
[ -category Category-Value ]
| -audlog off
| -audfac { Facility-Name | Facility-Number }
| -lbpathusetimes Number-Of-PathUseTimes
| -expathusetimes Number-Of-ExPathUseTimes
| -dpc { on | off } [-pathid AutoPATH_ID { -
lu | -storage } ]
| -dpcintvl Dpc-Interval
}
[-s]
Valid value
ElogLevel { 0 | 1 | 2 | 3 | 4 } (Default
Value 3)
ElogFileSize { 100 - 2000000 }(KB) (Default
Value 9900)
Command Reference
6-31
Hitachi Dynamic Link Manager User Guide for Solaris ®