HP XP P9500 Storage - Manual (Page 394)

displayed. The sorting key is iLU and its configuration information is
displayed for each LU.
By using the sub-parameter, -hdev or -pathid, you can filter the LU
information to be displayed. If you do not specify the -hdev or -pathid
parameter, the information about all LUs recognized by HDLM is
displayed.
For details on the content of each displayed item, see
Table 6-17
Displayed LU Information on page 6-58 .
The following shows the sub-parameters:
-hdev host-device-name
Filters the information only for the LUs corresponding to the specified
host device.
Specify the name of the logical device file (minus the slice number, in
cUtXdY format) for the HDLM device to indicate the desired host
device.
The host-device-name string is case-sensitive.
-pathid AutoPATH_ID
Use this parameter to display only the information about the LU that
is connected to the path with that specified AutoPATH_ID.
-t
Omits the title for each information item.
Example
# /opt/DynamicLinkManager/bin/dlnkmgr view -lu
Product : 9500V
SerialNumber : 0051
LUs : 3
iLU HDevName Device PathID Status
0001 c6t2d0 sd61 000003 Online
sd64 000009 Online
0002 c6t2d1 sd62 000004 Online
sd65 000010 Online
0003 c6t2d2 sd63 000005 Online
sd66 000011 Online
Product : 9970/9980
SerialNumber : 15001
LUs : 3
iLU HDevName Device PathID Status
0670 c6t5d0 sd74 000000 Online
sd80 000006 Offline(E)
0671 c6t5d1 sd75 000001 Online
sd81 000007 Offline(E)
0672 c6t5d2 sd76 000002 Online
sd82 000008 Offline(C)
KAPL01001-I The HDLM command completed normally. Operation
name = view, completion time = yyyy/mm/dd hh:mm:ss
#
6-54
Command Reference
Hitachi Dynamic Link Manager User Guide for Solaris ®