HP XP P9500 Storage - Manual (Page 269)

For details on the displayed items and their descriptions, see view (Displays
Information) on page 6-32 .
Changing the Status of Paths
This section explains how to change path statuses.
Changing the Status of Paths to Online
To change the status of paths to online:
1
.
Check the current status of the paths.
To place paths online by specifying an HBA port, CHA port, or single path
check the path name or PATH_ID used to manage the path.
The following shows an example of executing the command:
# /opt/DynamicLinkManager/bin/dlnkmgr view -path
To place paths online by specifying a SCSI device name, check the SCSI
device name of the path.
The following shows an example of executing the command:
# /opt/DynamicLinkManager/bin/dlnkmgr view -lu
2
.
To change the status of paths to online, execute the dlnkmgr command's
online operation.
The paths to be placed online can be specified by using an HBA port, CHA
port, or single path. Instead of specifying a path, you can also specify a
SCSI device name. For details on how to specify paths, see online (Places
Paths Online) on page 6-11 .
For example, if you want to place all the paths that pass through a
specific HBA port online, execute the dlnkmgr command's online
operation with the -hba parameter specified. The following shows an
example of executing the command:
# /opt/DynamicLinkManager/bin/dlnkmgr online -hba 0001.0000
KAPL01057-I All the paths which pass the specified HBA will be
changed to the Online status. Is this OK? [y/n]:y
HDLM Operation
4-7
Hitachi Dynamic Link Manager User Guide for Solaris ®