HP XP P9500 Storage - Manual (Page 119)

can access the publisher normally, the following procedure is not
required.
1
.
Execute the pkg publisher command.
# pkg publisher
PUBLISHER TYPE STATUS URI
solaris origin online http://pkg.oracle.com/solaris/release/
2
.
Disable the publisher of the package currently in use.
# pkg set-publisher --disable solaris
3
.
Install HDLM.
4
.
Enable the publisher of the package again.
# pkg set-publisher --enable solaris
Verifying signature-policy
HDLM does not support signatures. As such, verify that the system's
signature-policy is set to verify.
1
.
Execute pkg property signature-policy.
# pkg property signature-policy
PROPERTY VALUE
signature-policy verify
2
.
If verify is not set for signature-policy, execute the following
command to do so:
# pkg set-property signature-policy verify
3
.
Install HDLM.
4
.
Change the value of signature-policy back to the value output in step
1.
# pkg set-property signature-policy value-output-in-step-1
Notes
Do not press Ctrl+C during an HDLM installation or removal in a Solaris
11 environment, or the installation or removal will be interrupted.
Verifying non-global zone
In a Solaris 11 environment, if you cannot access the publisher of the
Solaris package that is currently in use and are installing HDLM in an
environment with a non-global zone configured, you need to detach the
configured non-global zone first. If you can correctly access the publisher
of the package that is in use, you do not need to perform this procedure.
1
.
Execute the zoneadm command.
# zoneadm list -cv
ID NAME STATUS PATH
BRAND IP
0 global running /
Creating an HDLM Environment
3-53
Hitachi Dynamic Link Manager User Guide for Solaris ®