HP XP P9500 Storage - Manual (Page 403)

Displayed item
Description
No summary
displayed
Summary
displayed
CU number, and the last two characters are the
internal LU number within the CU.
• For Hitachi Virtual Storage Platform, indicated
by a hexadecimal number. The first two
characters of iLU are the number of the logical
DKC (Disk Controller), the middle two numbers
are the CU number, and the last two characters
are the internal LU number within the CU.
When a virtual ID is not used, a hyphen (-) is
displayed.
Physical-
ChaPort -- When a path is migrated using a virtual ID, displays
port number of the CHA that is connected by the
migration-destination path.
When a virtual ID is not used, a hyphen (-) is
displayed.
-- Paths Total number of the paths recognized by HDLM for
the LU to be displayed.
-- OnlinePaths Number of online paths among the paths recognized
by HDLM for the LU. When the value of Paths is
equal to the value of OnlinePaths, all paths are
online. If the value of OnlinePaths is less than that
of Paths, some paths might have an error status, in
which case you should check the status of individual
paths and take resolve the problem for any paths
that have an error status.
Legend:
--: Not displayed
#1
This information is displayed when one of the following conditions exist:
- The user selected the item to be displayed by using the -lu -item
parameter.
- all was specified.
- No value was specified for the parameter.
#2
This information is displayed when one of the following conditions exist:
- The user selected the item to be displayed by using the -lu -c -item
parameter.
- No value was specified for the parameter.
#3
This storage system applies when the dynamic I/O path control function is
disabled.
Command Reference
6-63
Hitachi Dynamic Link Manager User Guide for Solaris ®