Changing the status of paths to offline(c) -8 – HP XP P9500 Storage User Manual
Page 270
KAPL01061-I 3 path(s) were successfully placed Online; 0 path(s)
were not. Operation name = online
#
3
.
Check to see if the statuses of all the applicable paths have changed.
The following shows an example of executing the command:
# /opt/DynamicLinkManager/bin/dlnkmgr view -path
Changing the Status of Paths to Offline(C)
To change the status of paths to Offline(C):
1
.
Check the current status of the paths.
To change the status of a path to Offline(C) by specifying an HBA port,
CHA port, or single path check the path name or PATH_ID used to
manage the path.
The following shows an example of executing the command:
# /opt/DynamicLinkManager/bin/dlnkmgr view -path
To place a path Offline(C) by specifying a SCSI device name, check the
SCSI device name of the path.
The following shows an example of executing the command:
# /opt/DynamicLinkManager/bin/dlnkmgr view -lu
2
.
To change the status of paths to Offline(C), execute the dlnkmgr
command's offline operation.
The paths to be placed offline can be specified by using an HBA port, CHA
port, or single path. Instead of specifying a path, you can also specify a
SCSI device name. For details on how to specify paths, see
For example, if you want to place all the paths that pass through a
specific HBA port offline, execute the dlnkmgr command's offline
operation with the -hba parameter specified. The following shows an
example of executing the command:
# /opt/DynamicLinkManager/bin/dlnkmgr offline -hba 0001.0000
KAPL01055-I All the paths which pass the specified HBA port will
be changed to the Offline(C) status. Is this OK? [y/n]:y
KAPL01056-I If you are sure that there would be no problem when
all the paths which pass the specified HBA are placed in the
Offline(C) status, enter y. Otherwise, enter n. [y/n]:y
KAPL01061-I 3 path(s) were successfully placed Offline(C); 0
path(s) were not. Operation name = offline
#
3
.
Check to see if the statuses of all the applicable paths have changed.
The following shows an example of executing the command:
4-8
HDLM Operation
Hitachi Dynamic Link Manager User Guide for Solaris
®