HP XP P9500 Storage - Manual (Page 435)

file, results in the creation of a list that shows the correspondences of the
logical device file names of HDLM devices.
# /opt/DynamicLinkManager/bin/dlmlisthdev /var/tmp/
old_view_path_list.txt
When upgrading HDLM 04-00 to a newer version of HDLM in a
Solaris 8 environment
The upgrade procedure is as follows:
1
.
Save the logical device file names of the HDLM devices used in HDLM
04-00.
Before removing HDLM 04-00, execute the dlnkmgr command's view -
path operation to save the output result in a file that has any desired file
name.
# /opt/DynamicLinkManager/bin/dlnkmgr view -path > /var/tmp/
old_view_path_list.txt
2
.
After removing HDLM 04-00, use the reconfiguration option to restart the
host.
3
.
Install a newer version of HDLM.
4
.
To confirm that HDLM has been successfully installed, check the path
configuration in HDLM.
5
.
Create a list that shows the correspondences between the logical device
file names of the HDLM devices in HDLM 04-00 and those in the newer
version of HDLM.
As the input file for the command, specify the file that stores the output
result of the dlnkmgr command's view -path operation executed before
HDLM 04-00 was removed. Executing the following command creates a
list for the correspondence of the logical device file names of the devices
in HDLM 04-00 and those in the newer version of HDLM, and displays the
result in the standard output. The result of the command execution is as
follows:
The following table lists and describes the items to be displayed.
Utility Reference
7-21
Hitachi Dynamic Link Manager User Guide for Solaris ®