HP XP P9500 Storage - Manual (Page 170)

# eeprom boot-device=/pci@7c0/pci@0/pci@1/pci@0,2/
SUNW,qlc@2,1/fp@0,0/disk@w50060e8010027a80,7:a
For how to obtain a device name to be set for OBP, see the
documentation of the HBA you are using.
10
.
Execute the init command and restart the host.
# init 6
Do not use the reboot command to restart the host.
11
.
Execute the beadm list command to make sure the OS is booted from
the boot device you created named hdlmboot.
Make sure NR is shown in the Active column of the hdlmboot row for the
boot device you created.
# beadm list
BE Active Mountpoint Space Policy Created
-- ------ ---------- ----- ------ -------
hdlmboot NR / 2.12G static 2011-12-06 11:37
solaris R - 2.94G static 2011-11-29 14:42
12
.
Use the view -path HDLM command to check the path status after the
migration.
If the ZFS boot disk environment after the migration is a device which is
not managed by HDLM, this procedure is not necessary.
# /opt/DynamicLinkManager/bin/dlnkmgr view -path
Paths:000032 OnlinePaths:000026
PathStatus IO-Count IO-Errors
Reduced 791869 0
PathID PathName
DskName iLU
ChaPort Status Type IO-Count IO-Errors DNum HDevName
000000 0000.0000.0000000000641000.000B HITACHI .DF600F .
85011299 0008 0A Online Own
8840 0 - c6t50060E8010027A80d7
000001 0000.0000.0000000000641400.000B HITACHI .DF600F .
85011299 0008 1A Online Own
1506 0 - c6t50060E8010027A80d7
...
#
Confirm that the number of I/Os are counted for the HDLM device (the
underlined part of c6t50060E8010027A80d7) which is specified as the boot
device.
Configuring a ZFS Boot Disk Environment after the Migration
This subsection describes how to configure a ZFS boot disk environment after
the migration.
3-104
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide for Solaris ®