HP XP P9500 Storage - Manual (Page 533)

Message
ID
Message Text Explanation
KAPL09237
-I
A user operation ended
installhdlm.
Details
The process has been terminated
by an operation such as Ctrl+C.
Action
Check if the /var/opt/
DynamicLinkManager directory
exists. If the directory exists,
delete it by using the following
command:
# rm -rf /var/opt/
DynamicLinkManager
However, if you interrupted an
upgrade installation or re-
installation, do not delete this
directory.
Also, execute the following
command to check the status.
# pkginfo -l DLManager
If partially installed is
displayed for the status, perform
an update installation.
KAPL09238
-W
The specified file is not a normal
one. Fail name = aa...aa
Details
A file other than a normal one (for
example, a directory file or a
special file.) is specified.
aa...aa: Specified file name
(character string)
Action
Specify the correct file, and then
retry the operation.
KAPL09239
-I
The system will now restart. Details
The host will restart because
restart was specified in the
installation information settings
file.
Action
None.
KAPL09241
-W
An attempt to install an HDLM
component failed. Error Code =
aa...aa
Details
An attempt to install an HDLM
component failed.
aa...aa: Error number (decimal
number) that specifies the
executed processing
Action
Depending on the output error
code, take the appropriate action
as shown below. Note that this
Messages
8-77
Hitachi Dynamic Link Manager User Guide for Solaris ®