HP XP P9500 Storage - Manual (Page 102)

Legend:
Y: Can be used
N: Cannot be used
Memory and Disk Capacity Requirements
This subsection explains the memory and disk capacity requirements.
Memory Requirements
The host requires 11 MB of memory.
Disk Capacity Requirements
The following table lists the disk capacity requirements for a host.
Table 3-18 Disk capacity requirements for a host
Directory Disk capacity requirement
/etc 3MB
/kernel/drv 2MB + x bytes
(x = the-number-of-LUs × the-number-of-
physical-paths × 1.5KB)
/opt 274MB
/var
#1 pMB #2 + qMB #3 + 11MB
#1
100MB of free capacity is required in /var/tmp during installation.
#2
This value depends on the error log file settings. The maximum is
30000MB.
p = (s × m) ÷ 1024 (in MB),
where:
s is the size of the error log file (units: KB, default is 9,900), and
m is the number of error log files (default is 2). The resulting fraction will
be rounded up.
#3
This value depends on the trace file settings. The maximum is 1000 MB.
q = (t × n) ÷ 1024 (in MB),
where:
t is the size of the trace file (units: KB, default is 1,000), and
n is the number of trace files (default is 4). The resulting fraction will be
rounded up.
3-36
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide for Solaris ®