Obtaining hardware information – HP StorageWorks 2.64 Director Switch User Manual
Page 56
Monitoring and managing the director
56
• Power indicator—The green indicator simulates the power LED on the actual director. When
the indicator illuminates, the director is connected to facility AC power and is operational.
The indicator will be on if either power supply is operating.
• System error indicator—The amber system error light indicator (illuminated in the Hardware
on page 54) simulates the system error light on the actual
director. When this indicator illuminates, an event has occurred requiring immediate
attention, such as a system, fan, power supply, or port failure. View details of system errors
by choosing Event Log from the Logs menu on the menu bar. The indicator in the Hardware
view and the LED on the actual unit remains illuminated until you clear the event by
right-clicking on the director graphic, away from an FRU, and choosing Clear System Error
Light from the pop-up menu.
NOTE:
If the amber LED flashes, this indicates that unit beaconing has been enabled for
the director. Enable or disable unit beaconing by right-clicking on the director graphic,
away from an FRU, and choosing Enable Unit Beaconing from the pop-up menu.
6.
Power supply failure indicator—When a blinking red and yellow diamond ( ) displays on a
power supply with the amber Fault indicator illuminated, the power supply has failed. The
backup power supply has taken over to supply DC voltage to the director.
NOTE:
A green indicator displays and no status symbols display if the power supply is
working, as shown on the left (position 1) in
55.
7.
Cooling fan module failure indicator—When a blinking red and yellow diamond ( ) displays
on a fan module with the amber LED indicator illuminated, the module has failed or is rotating
insufficiently.
8.
SBAR card beaconing indicator—The yellow triangle status symbol ( ) displaying on the SBAR
card, with the amber LED illuminated, indicates that beaconing has been enabled.
9.
SBAR failure indicator—The blinking red and yellow diamond ( ) displaying on the SBAR card
with the amber LED illuminated indicates a card failure.
Obtaining hardware information
This section explains how to access the FRU Properties, Port Properties, and Director Properties
dialog boxes.