HP StorageWorks 2.64 Director Switch - Manual (Page 181)

Director Element Manager user guide 181
The director must be offline to
change the Management Style.
You attempted to change
management style with firmware
level less than 6.0.
Select Set Online State from the
Maintenance menu and then click Set
Offline. You can then change the
management style. Set the director back
online when finished.
The director must be offline to
configure.
You attempted a configuration
change while the director was online.
Set the director offline and then perform
the configuration change.
The Domain ID was not accepted.
The World Wide Name and
Domain ID must be unique in the
Fabric Membership List.
You attempted to add a detached
switch to the Fabric Membership List
through the Fabric Binding option
(SANtegrity Binding feature), but a
switch already exists in the fabric
with the same domain ID.
Enter a unique domain ID for the switch in
the Add Detached Switch dialog box.
The management server is busy
processing a request from another
Element Manager.
The HAFM appliance is processing a
request from another instance of an
Element Manager and cannot
perform the requested operation.
Wait until the process completes, then
perform the operation again.
The link to the managed product is
not available.
The Ethernet connection between the
HAFM appliance and managed
product is down or unavailable.
Establish and verify the network
connection.
The maximum number of aliases
has already been configured.
The maximum number of aliases
allowed was reached.
Delete an existing alias before adding a
new alias.
The maximum number of
management server network
addresses has already been
configured.
The number of HAFM appliance IP
addressees that can be defined to the
HAFM application has already been
configured.
Delete an existing IP address before
adding a new address.
The maximum number of members
has already been configured.
The maximum number of unique
members is 4097. The maximum
number of members is 8192.
Delete an existing zone member before
adding a new zone member.
The maximum number of
nicknames has already been
configured.
The maximum number of nicknames
that can be defined to the HAFM
application was reached.
Delete an existing nickname before adding
a new nickname.
The maximum number of open
products has already been
reached.
The maximum number of open
switches allowed was reached.
Close an Element Manager session
(existing open product) before opening a
new session.
The maximum number of products
has already been configured.
The number of managed HP switches
(48) that can be defined to the HAFM
application was reached.
Delete an existing product before adding a
new product.
The maximum number of products
of this type has already been
configured.
The number of managed HP switches
of this type (48) that can be defined
to the HAFM application was
reached.
Delete an existing product of this type
before adding a new product.
Table 9 HAFM messages (continued)
Message Description Action