HP StorageWorks 2.64 Director Switch - Manual (Page 31)

Director Element Manager user guide 31
Data collection
This option displays the Save Data Collection dialog box. Use this dialog box to collect
maintenance data into a file. This file is used by support personnel to diagnose system problems.
For instructions, refer to the HP StorageWorks Director 2/64 service manual for the Director 2/64
and the HP StorageWorks Director 2/140 service manual for the Director 2/140.
IPL
Select this option to initiate an initial program load on the director. A dialog box displays to allow
you to confirm the IPL. Note that an IPL does not affect any configuration settings done through the
Element Manager. Port operation is not interrupted during the IPL.
For instructions, refer to the HP StorageWorks Director 2/64 service manual for the Director 2/64
and the HP StorageWorks Director 2/140 service manual for the Director 2/140.
Set online state
Select this option to display the Set Online State dialog box. Use this dialog box to change the
online state of the director to offline or online.
Firmware library
Select this option to display the Firmware Library dialog box. This dialog box displays all firmware
versions currently installed on the HAFM appliance that can be downloaded to directors. Use this
dialog box to add a new firmware version to the HAFM appliance’s hard disk, modify the
description displayed for an existing version, delete a version from the PC, or download (send) a
version for operation on a director.
For additional information on using this option, refer to the HP StorageWorks Director 2/64 service
manual for the Director 2/64 or the HP StorageWorks Director 2/140 service manual for the
Director 2/140.
Enable e-mail notification
The Simple Mail Transfer Protocol (SMTP) server, e-mail recipient addresses, and e-mail notification
are configured in the HAFM application (not in the director’s Element Manager) for all products.
However, the E-Mail Notification option on the Element Manager’s Maintenance menu must be
enabled (checked) for e-mail notification to occur for the specific director.
The default setting for the Enable E-Mail Notification option is enabled (checked). To disable the
option, select Maintenance > Enable E-Mail Notification to clear the check box.
For additional information on using this option, see ”
Enable e-mail notification ” on page 143.
Enable call home notification
Select Maintenance > Enable Call Home Notification to enable the call-home function for the
director.
The parameters of the call-home feature are configured in Windows
® . For instructions, refer to the
HP StorageWorks HA-Fabric Manager Appliance installation guide.