HP StorageWorks 2.64 Director Switch User Manual
Page 178

Information and error messages
178
Invalid request.
Three conditions result in this
message:
•
You tried to add or modify a
product from Product View and
the network address is already in
use. (Network addresses must be
unique.)
•
You tried to create a new user
with a username that already
exists. (A username must be
unique.)
•
You tried to delete the default
Administrator user. (The default
Administrator user cannot be
deleted.)
Select the action that is appropriate to the
activity that caused the error:
•
Network address: Specify a unique
network address for the product.
•
username: Specify a unique username
for the new user ID.
•
Do not delete the default Administrator
user.
Invalid UDP port number.
The specified user datagram protocol
(UDP) port number is invalid. The
number must be an integer from 1
through 65535 inclusive.
Verify and enter a valid UDP port number.
Invalid World Wide Name.
The specified World Wide Name
format is invalid. The valid format is
eight two-digit hexadecimal numbers
separated by colons (xx:xx:xx:xx:
xx:xx:xx:xx).
Enter a World Wide Name using the
correct format.
Invalid World Wide Name or
nickname.
The World Wide Name or nickname
that you have specified is invalid. The
valid format for the World Wide
Name is eight two-digit hexadecimal
numbers separated by colons
(xx:xx:xx:xx:xx: xx:xx:xx). The valid
format for a nickname is non blank
characters, up to 32 characters.
Try the operation again using a valid
World Wide Name or nickname.
Invalid World Wide Name. Valid
WWN format is: xx:xx:xx:xx:xx:
xx:xx:xx.
The specified World Wide Name
format is invalid. The valid format is
eight two-digit hexadecimal numbers
separated by colons (xx:xx:xx:xx:
xx:xx:xx:xx).
Retry the operation using a valid WWN or
nickname.
Invalid zone in zone set.
The defined zone no longer exists
and is invalid.
Delete the invalid zone from the zone set.
Limit exceeded.
You cannot add a new product or
user to HAFM application if the
maximum number of that resource
already exists on the system.
Delete unneeded products or users from
the system, before attempting to add any
new ones.
No address selected.
You cannot complete the operation
because an address has not been
selected.
Select an address and retry the operation.
Table 9
HAFM messages (continued)
Message
Description
Action