HP StorageWorks 2.64 Director Switch - Manual (Page 182)

Information and error messages 182
The maximum number of remote
network addresses has already
been configured.
A maximum number of eight IP
addresses for remote workstations
can be configured at the Session
Options dialog box. That number
was reached.
Delete an existing IP address before
adding a new IP address.
The maximum number of users has
already been configured.
The number of users (32) that can be
defined to the HAFM application was
reached.
Delete an existing user before adding a
new user.
The maximum number of zones
allowed has already been
configured.
The maximum number of zones that
can be defined was reached.
Delete an existing zone before adding a
new zone.
The maximum number of zone sets
has already been configured.
The maximum number of zone sets
that can be defined was reached.
Delete an existing zone set before adding
a new zone set.
The maximum number of zones per
zone set has already been
configured.
The maximum number of zones that
can be defined in a zone set was
reached.
Delete an existing zone before adding a
new zone to the zone set.
The nickname does not exist. The entered nickname does not exist
in the fabric.
Configure the nickname to the appropriate
product or select an existing nickname.
The nickname is already assigned.
Either use a different name or do
not save the name as a nickname.
The entered nickname already exists
in the fabric. Each nickname must be
unique.
Define a different nickname.
The software version on this
management server is not
compatible with the version on the
remote management server.
A second HAFM appliance (client)
connecting to the HAFM appliance
must be running the same software
version to log in.
Upgrade the software version on the
downlevel HAFM appliance.
The zoning library conversion must
be completed before continuing.
The zoning library conversion is
incomplete and the requested
operation cannot continue.
Complete the zoning library conversion,
then retry the operation.
This fabric log is no longer valid
because the fabric has been
unpersisted.
The selected fabric log is no longer
available because the fabric has
been unpersisted.
To start a new log for the fabric, persist the
fabric through the Persist Fabric dialog
box.
This network address has already
been assigned.
The specified IP address was
assigned and configured. A unique
address must be assigned.
Consult with the customer’s network
administrator to determine a new IP
address to be assigned and configured.
This product is not managed by this
management server.
The product selected is not managed
by this HAFM appliance.
Select a product managed by this HAFM
appliance or go to the HAFM appliance
that manages the affected product.
This switch is currently part of this
fabric and cannot be removed from
the Fabric Membership List. Isolate
the switch from the fabric prior to
removing it from the Fabric
Membership List.
You attempted to remove a switch
from the Fabric Membership List
using the Fabric Binding option, but
the switch is still part of the fabric.
Remove the switch from the fabric by
setting the switch offline or blocking the
E_Port where the switch is connected.
Table 9 HAFM messages (continued)
Message Description Action