HP StorageWorks 2.64 Director Switch User Manual
Page 32
Overview
32
Backup & restore configuration
Select this option to save the product configuration stored on the director to the HAFM appliance
hard disk or to restore the configuration data from the HAFM appliance. Only a single copy of the
configuration is kept on the appliance.
This backup is primarily for single-CTP systems, where a backup is needed to restore the
configuration data to a replacement CTP card. You cannot modify the location or the file name of
the saved configuration.
For additional information on using this option, see ”
Backing up and restoring configuration data
NOTE:
You can only restore the configuration to a director with the same IP address.
Reset configuration
Select this option to reset all director configuration data back to the factory defaults. When you
select this option, a confirmation dialog box displays with a warning. For additional information on
using this option, see ”
CAUTION:
This operation resets all configuration including any optional features that have been
installed. You will need to re-enter your feature key to enable all optional features after resetting the
configuration.
Help menu
Select the Help menu to display the following options.
Contents
Select this option to display the Help window. The Help window contains Contents, Index, and
Search buttons and hypertext-linked items to help you quickly navigate through information. Use the
forward (>) and back (<) buttons to scroll forward and backward through the displayed Help
frames. Exit the Help feature at any time by clicking the Close icon at the top of the Help window.
About
Select this option to display the version number for the Element and copyright information.