HP StorageWorks 2.64 Director Switch - Manual (Page 18)

Overview 18
• Configure port address configurations (FICON management style only).
• Configure SNMP trap recipients and community names.
• Configure the FICON and Open Systems Management Server features if optional Open Systems
Management Server is installed.
• Configure Switch Binding if optional SANtegrity Binding feature is installed.
• Configure Open Trunking if optional Open Trunking feature is installed.
• Configure the management style between Open Systems and FICON management.
• Configure the director name, location, description, and contact person.
• Configure the data speed for the director (Director 2/64 only) and individual ports.
• Configure threshold alerts for ports.
• Control individual Fibre Channel ports by blocking/unblocking operation, enabling LIN alerts
and Port Binding, setting data speeds, and running internal and external loopback diagnostics.
• Display FRU properties such as the FRU name, physical position in the director (chassis slot
number), active/failed state, part number, and serial number.
• Display information for individual Fibre Channel ports, such as the port name, port number,
Fibre Channel address, operational state, type of port, and login data.
• Display information on nodes attached to ports.
• Display port performance and statistics.
• Display vital product data for the director, such as the system name, description, contact person,
location, status, model number, firmware and Engineering Change (EC) level, and
manufacturer.
• Enable Alternate Control Prohibited (ACP) to restrict access to FICON director connectivity
parameters.
• Enable beaconing for ports and the director unit.
• Enable channel wrap mode (FICON management style only).
• Maintain a port address library (FICON management style only).
• Monitor the operational status of the director and each of its hardware field-replaceable units.
• Perform an initial program load (IPL).
• Perform maintenance tasks for the director including maintaining firmware levels, enabling the
call-home feature, accessing the director logs, and collecting data to support failure analysis.
• Reset port operation.
• Run port diagnostics.
• Set the date and time on the director.
• Swap addresses between ports (FICON management style only).