HP StorageWorks 2.64 Director Switch - Manual (Page 143)

Director Element Manager user guide 143
To set the director online or offline (depending on current state), right-click the director in the
Hardware View and select Set Online State from the menu, or use the following steps:
1. Select Set Online State from the Maintenance menu on the menu bar.
2. Click Set Offline or Set Online, depending on the operating state you want to set.
3. When a warning box appears requesting you to confirm the offline or online state, click OK.
As the director goes offline,
OFFLINE
appears in the State field of the Director Status table in the
Hardware View. LED indicators on all ports with attached devices stay green, but the director is
sending offline sequences (OLS) to these devices.
Manage firmware versions
Firmware refers to the internal operating code for the director. You can maintain up to eight
firmware versions on the HAFM appliance for downloading to a director. To use the Firmware
Library option to manage firmware versions, follow the steps in the HP StorageWorks Director
2/64 service manual for the Director 2/64 and the HP StorageWorks Director 2/140 service
manual for the Director 2/140.
Enable e-mail notification
E-mail addresses and the simple mail transfer protocol (SMTP) server address for e-mail notification
of director events must be configured through the HAFM application. Refer to the HP StorageWorks
HA-Fabric Manager user guide for instructions on configuring e-mail.
NOTE: E-mail recipients are configured in the HAFM application through the Configure E-Mail
dialog box. A valid SMTP address is configured in this dialog box.
Use the Enable E-Mail Notification function on the Element Manager to enable e-mail notification
for events that occur on a selected director. The default state is disabled.