HP StorageWorks 2.64 Director Switch - Manual (Page 37)

Director Element Manager user guide 37
• Right-click the port card to display a pop-up menu with these options: Block All Ports, Unblock
All Ports, and Diagnostics.
• Right-click the port connector to display a menu with these options: Port Properties, Node
Properties, Port Technology, Block Port, Enable Beaconing, Diagnostics, Channel Wrap (FICON
management style only), Swap Ports (FICON management style only), Clear Link Incident
Alert(s), Reset Port, Port Binding, and Clear Threshold Alert(s).
These options also display when you click a port connector and select Product > Port.
• Double-click a port connector to display the Port Properties dialog box.
• Return to the Hardware view by clicking Back to Full View.
See ” Port Card view ” on page 63 for detailed information on this view.
Port List view
To display the Port List view, click the Port List view tab. A table, as shown in Figure 8 , displays in
the View panel. This table includes the port number, port name, port address (FICON management
style only), the block/unblock configuration, operating state, port type of the selected port.
Figure 8 Port List view
The Port List view displays information about all ports installed in the director. All data is dynamic
and updates automatically. Double-click any row in this view to display the Port Properties dialog
box for the port.