HP StorageWorks 2.64 Director Switch - Manual (Page 36)

Overview 36
SBAR Card menu
Double-click a serial crossbar (SBAR) to display its FRU Properties dialog box. Right-click an SBAR
card to display the following options: For details see ” SBAR Card menu ” on page 62.
• FRU Properties
• Enable Card Beaconing
• Switchover
These options are also available when you click the SBAR card and select Product > FRU on the
menu bar.
Port Card view
To display the Port Card view for a port, as shown in Figure 7 on page 36:
• Double-click a port card in the Hardware view.
Or
• Right-click a port card and click Open Port Card View.
The Port Card view displays, as shown in Figure 7 .
Figure 7 Port Card view
In this expanded view of the port card, you can:
• Determine the port card status by viewing the amber LED at the top of the card. Identify the FRU
name, position, operating state, beaconing state, and part number of the port from the table
shown in this view.
• Determine port status and operation by the status symbols that display next to the port
connectors and simulated LED indicators above the connectors.