HP StorageWorks 2.64 Director Switch - Manual (Page 119)

Director Element Manager user guide 119
• Tx Throughput—An alert will occur if the threshold set for transmit throughput is reached.
• Rx or Tx Throughput—An alert will occur if the threshold set for either receive or transmit
throughput is reached.
5. Click Next. A new screen displays with additional parameters, as shown in Figure 50 . The
name configured for the alert displays at the top of the screen.
NOTE: Click Previous if you need to return to the previous screen.
Figure 50 New Threshold Alerts dialog box - second screen
6. Enter a percentage from 1 through 100 for % utilization. When throughput reaches this
percentage of port capacity, a threshold alert will occur.
7. Enter the amount of cumulative minutes in which the % utilization should exist during the
notification interval before an alert is generated. You can also click At any time if you want an
alert to occur whenever the set % utilization is reached. The valid range is from 1 to the interval
value set in step 8 .
8. Enter the interval in minutes in which throughput is measured and threshold notifications can
occur. The valid range is 5 minutes to 70,560 minutes.