beautypg.com

HP StorageWorks 2.64 Director Switch User Manual

Page 155

background image

Director Element Manager user guide 155

The following rules apply when configuring preferred paths:

The switch’s domain ID must be set to insistent.

Domain IDs must be in the range of 1 through 31.

The specified numbers for Source Ports and Exit Ports must be in the range equal to the number

of ports for the switch being configured.

For any source port, only one path may be defined to each destination domain ID.

To install and enable this option, select the Features option under the Element Manager’s Configure

menu. See ”

Configuring a feature key

” on page 104.

This manual is related to the following products: