HP StorageWorks 2.64 Director Switch - Manual (Page 158)

Optional features 158
3. Select the Parameters option to open the Configure FICON Management Server Parameters
dialog box, as shown in Figure 72 .
Figure 72 Configure FICON Management Server Parameters dialog box
4. Click the Switch Clock Alert Mode check box to enable or disable switch clock alert mode.
When a check mark appears, the alert mode is enabled.
5. Click the Host Control Prohibited check box to allow or prohibit host control. When a check
mark appears, host control is prohibited.
6. Click the Programmed offline state control check box to allow or prohibit offline state control.
When a check mark appears, programmed control of the offline state is allowed.
7. Click the Active=Saved check box to enable or disable Active=Saved mode. When a check
mark appears, the Active=Saved mode is enabled.
8. If necessary, select a code page from the Code Page drop-down list.
9. Click Activate to activate changes and close the dialog box.
10. If you are finished configuring the switch, back up the configuration data.
Open systems management server
The Open System Management Server (OSMS) is a keyed feature that allows host control and
inband management of the director or switch through a management application that resides on
an open-systems interconnection (OSI) device. This device is attached to a director or switch port.
The device communicates with the switch or director through Fibre Channel common transport
(FC-CT) protocol.
Installation
To install and enable this option, select the Configure Feature Key option under the Element
Manager’s Configure menu.