HP StorageWorks 2.64 Director Switch - Manual (Page 101)

Director Element Manager user guide 101
Warnings and error messages
If you click Activate when any node attached to a port does not match the WWN or nickname in
that port’s Bound WWN column, a Warning! dialog box displays. If you click Continue, all nodes
listed will be logged off, and the ports will attach to the respective devices identified in the Bound
WWN column.
If you click Activate when the format for the WWN or nickname in the Bound WWN column is not
valid, an error message displays. For example,
The WWN is not in the
xx.xx.xx.xx.xx.xx.xx.xx format
.
Menu options
Menu options are available when you right-click any column except the Port # column:
• Name (Open Systems management style only)
• Clear All Port Names—Clears all port names entered in this column.
• Blocked (open systems management style only)
• Block All Ports—Places a check mark in all check boxes in the Blocked column and blocks
all ports on the switch.
• Unblock All Ports—Clears all check boxes in the Blocked column and unblocks all ports on
the switch.
• 10-100 km
• Clear All 10-100 km—Clears all check boxes in the column. No port will be set for
extended distance buffering.
• Set All 10-100 km—Places a check mark in all check boxes in the column and sets extended
distance buffering for all ports.
• LIN Alerts
• Clear All LIN Alerts—Clears all LIN Alert check boxes in the column. LIN alerts will be
disabled for all ports on the switch.
• Set All LIN Alerts—Places a check mark in all check boxes in this column. LIN alerts will be
enabled for all ports on the switch.
• Type (open systems management style only)
• Set All to G_Ports—Sets all fields in this column to G_Port and configures all ports on the
switch as G_Ports.
• Set All to F_Ports—Sets all fields in this column to F_Port and configures all ports on the
switch as F_Ports.
• Set All to E_Ports—Sets all fields in this column to E_Port and configures all ports on the
switch as E_Ports.
• Speed
• Set All To 1 Gb/sec—Sets the port optics to a 1 Gb/s data rate.
• Set All To 2 Gb/sec—Sets the port optics to a 2 Gb/s data rate.
• Set All To Negotiate—Allows the port to negotiate the data rate with the attached device.