HP StorageWorks 2.64 Director Switch - Manual (Page 192)

Information and error messages 192
Director clock alert mode must be
cleared before enabling period
synchronization. Clock alert mode is enabled through
the Configure FICON Management
Server dialog box and you attempted
to enable Periodic Date/Time
Synchronization through the
Configure Date and Time dialog box. Disable clock alert mode through the
Configure FICON Management Server
dialog box.
Director must be offline to
configure. Clock alert mode is enabled through
the Configure FICON Management
Server dialog box and you attempted
to enable Periodic Date/Time
Synchronization through the
Configure Date and Time dialog box. Disable clock alert mode through the
Configure FICON Management Server
dialog box.
Disabling Insistent Domain ID will
disable Fabric Binding. Do you
want to continue? Fabric Binding is enabled through
HAFM and you attempted to disable
Insistent Domain ID in the Configure
Switch Parameters dialog box. Click Yes if you want to continue and
disable Fabric Binding.
Disabling Insistent Domain ID will
disable Fabric Binding. Do you
want to continue? Fabric Binding is enabled through the
HAFM and user attempted to disable
Insistent Domain ID in the Configure
Switch Parameters dialog box. Click Yes if you want to continue and
disable Fabric Binding.
Disabling Switch Binding will
disable Enterprise Fabric Mode. Do
you want to continue? You attempted to disable Switch
Binding through the Switch Binding
State Change dialog box, but
Enterprise Fabric Mode is enabled. Disable Enterprise Fabric Mode through
the Enterprise Fabric Mode dialog box
before disabling Switch Binding.
Do you want to continue with IPL? This message requests confirmation to
initial program load (IPL) the director. Click Yes to IPL the director or Cancel to
cancel the operation.
Domain IDs must be in the range of
1 to 31. Domain IDs entered in the Configure
Preferred Paths dialog box must fall in
a specific range. In the Configure Preferred Paths dialog
box, change the number in the Destination
Domain ID field to a number between 1
and 31, inclusive.
Duplicate Community names
require identical write
authorizations. Duplicate community names are
entered at the Configure SNMP
dialog box, and have different write
authorizations. Delete the duplicate community name or
make the write authorizations consistent.
Element Manager error . The Element Manager encountered an
internal error and cannot continue.
Contact the next level of support to report
the problem.
Element Manager instance is
currently open. A Element Manager window is
currently open. Informational message only.
Table 10 Element Manager messages (continued)
Message Description Action