HP StorageWorks 2.64 Director Switch - Manual (Page 127)

Director Element Manager user guide 127
Audit log
The Audit Log displays a history of all configuration changes applied to the director from any
source such as HAFM, SNMP management stations, or host.
Figure 56 Audit log
Some actions, such as backing up configuration data and enabling automatic date/time
synchronization, are performed only by the HAFM appliance without director interaction. These
actions are indicated when HAFM displays in the Source column, as shown in Figure 56 . If
HAFM does not display, the time stamp is from the director.
• Date/Time—The date and time of the change on the director.
• Action—User action that caused the configuration change, such as offline status, port name
change, or change of address.
• Source—Identifies the user making the change through the Director Element Manager and IP or
DNS host name address of the remote user’s workstation.
•
Maintenance Port
—Change was made by a user connected to the maintenance port.
•
HAFM application
—Change was made by an Element Manager user.
•
SNMP
—Change was made by a remote SNMP management station.
•
Fabric
—Change was initiated by another director in the fabric that is not managed by this
HAFM appliance.
• Web
server
—Change was made by a user through the Embedded Web Server interface.
•
Fibre Channel Host
—Change was made inband by a Fibre Channel host through the
Open Systems or FICON management server.
•
Telnet
—Change was made through a Telnet connection.