beautypg.com

Table 7 data default values, 7 data default values – HP StorageWorks 2.64 Director Switch User Manual

Page 147

background image

Director Element Manager user guide 147

Factory-default values may vary, depending on the firmware release installed in your director. For

a list of values, refer to the HP StorageWorks Director 2/64 service manual for the Director 2/64

and the HP StorageWorks Director 2/140 service manual for the Director 2/140.

Table 7

Data default values

Configuration

Description

Default

Identification

Director Name

NULL string

Director Description

“Fibre Channel Director”

Director Contact

“End User Contact (please configure)”

Director Location

“End User Contact (please configure)”

Ports

Port Names

NULL strings

Port Blocked States

Unblocked

Extended Distance

(10–100 km)

Disabled

RX BB Credit

Disabled

LIN Alerts

Disabled

Port Address

Port number plus 4

Director Addressing

IP Address

10, mac[3], mac[4], mac[5] converted to word32
MAC addresses are set in hexadecimal; IP addresses in

decimal. A MAC address of 08 00 88 20 00 57 will be

reset to an IP address of 10.32.0.87.

Subnet Mask

255.0.0.0

Gateway Address

0.0.0.0

MAC Address

PROM value

Operating

Parameters

Preferred Domain ID

1

Buffer-to-Buffer Credit

16

R_A_TOV

10 seconds (100 tenths)

E_D_TOV

2 seconds (20 tenths)

Director Priority

254

Insistent Disabled
Rerouting Delay

Enabled

Domain RSCNs

Disabled

Suppress Zoning RSCNs

Disabled

This manual is related to the following products: