Figure 54 export configuration report dialog box, Enabling embedded web server, Enabling telnet – HP StorageWorks 2.64 Director Switch User Manual
Page 123: 54 export configuration report dialog box

Director Element Manager user guide 123
To export a configuration report:
1.
Click Configure > Export Configuration Report. The Export Configuration Report dialog box
displays, as shown in
Figure 54
Export Configuration Report dialog box
2.
Select the folder where you want to save the file.
3.
Type in a file name and extension in the File name field.
4.
Click Save. The file saves to the specified folder as an ASCII text file.
Enabling Embedded Web Server
Use the following steps to enable EWS:
1.
At the Hardware view page, click Configure > Enable Web Server. Choosing Enable Web
Server automatically places a check mark in the check box.
2.
Click Enable Web Server again to remove the check mark and disable the EWS interface.
When disabled, remote users cannot access the interface.
For complete procedures on using EWS, refer to HP StorageWorks Embedded Web Server user
guide.
Enabling Telnet
Use the following steps to enable Telnet:
1.
At the Hardware view, click Configure > Enable Telnet. Choosing Enable Telnet automatically
places a check mark in the check box.
2.
Click Enable Telnet again to remove the check mark and disable Telnet access. When disabled,
remote users cannot access the director through Telnet.
1
Details
2
List
3
Create new folder
4
Home
5
Go up one level
6
Drive list
1
4
2
3
5
6