HP StorageWorks 2.64 Director Switch - Manual (Page 102)

Configuring the director 102
NOTE: Your director model, firmware, and port cards may not allow 2 Gb/s data speeds.
• Port Binding
• Bind All WWNs—Places a check mark in all check boxes in this column and binds each port
to the device with the WWN or nickname entered in the Bound WWN column for that port.
• Unbind All WWNs—Removes check marks in all check boxes in this column. A device with
any WWN can attach to all ports.
• Bind All Ports to Attached WWN—Places a check mark in all check boxes in this column
and binds each port to the device currently attached to that port. The Bound WWN column
will display that device’s WWN.
• Bind Port to Attached WWN—Places a check mark in the check box for the port where you
clicked to display the menu. This binds that port to the device currently attached to that port.
The Bound WWN column will display that device’s WWN.
• Clear All Bound WWNs—Clears all WWNs listed in the Bound WWN column.
• Bound WWN
• Bind All WWNs—Places a check mark in all check boxes in this column and binds each port
to the device with the WWN or nickname entered in the Bound WWN column for that port.
• Unbind All WWNs—Removes check marks in all check boxes in this column. A device with
any WWN can attach to all ports.
• Bind All Ports to Attached WWN—Places a check mark in all check boxes in this column
and binds each port to the device currently attached to that port. The Bound WWN column
will display that device’s WWN.
• Bind Port to Attached WWN—Places a check mark in the check box for the port where you
clicked to display the menu. This binds that port to the device currently attached to that port.
The Bound WWN column will display that device’s WWN.
• Clear All Bound WWNs—Clears all WWNs listed in the Bound WWN column.