HP OneView User Manual
Page 309
7.
For Sharing, choose Shared or Private.
Shared enables the volume to be used by more than one server profile. Private makes the
volume available to only one server profile, and is required to enable booting from the volume.
8.
Click Create to save your settings and create the volume.
A.7.1.3 Creating Direct attach networks and adding them to the uplink sets
You can connect an HP 3PAR StorServe Storage system directly to the interconnects. This is called
a Direct attach network configuration, also known as Flat SAN. To see a graphical representation
of the configuration, see
.
If you are using a Direct attach connection, you must create Direct attach Fibre Channel networks.
When you create the Direct attach networks, you do not need to know what physical connections
are used or which enclosure is connected to the storage system. The physical connections are
specified in the uplink sets. For this procedure, you must supply the names of the networks, and
decide if you want to change the default values the appliance provides for configuration attributes
like preferred bandwidth, maximum bandwidth, and uplink speed.
Create Direct attach networks
1.
From the
, select Networks.
2.
Click Create Network.
3.
For Name, enter Direct A.
4.
For Type, select Fibre Channel.
5.
For Fabric type, select Direct attach.
6.
For this data center, use the default values for the other configuration attributes.
7.
Click Create +.
The appliance creates the network and opens the Create network dialog box. This dialog box
uses the configuration values you selected in the preceding steps, except for the name.
8.
In Name, enter Direct B and click Create.
The Networks screen opens.
Add Direct attach Fibre Channel networks to the uplink sets
The uplink sets assign data center networks to physical interconnect ports. You must edit the uplink
set you created previously to replace the fabric attach networks with direct attach networks.
A.7 Adding a storage system to the data center 309