HP OneView - Manual (Page 245)

31.9.3 HP SUM errors
Possible cause and recommendation Symptom
Recommendation
1. Restart the appliance.
2.
Update the firmware again.
Unable to remove the
firmware upgrade log
files
Update the firmware again. Unable to initiate the
firmware update
request
31.10 Troubleshooting interconnects
31.10.1 Interconnect edit is unsuccessful
Possible cause and recommendation Symptom
If interconnect edit is unsuccessful:
1. Verify that the prerequisites listed in the online help are met.
2. Follow the instructions provided by any notification message.
When the interconnect has been edited successfully, a notification will display in the banner
at the top of the screen, and the desired port setting and port status will be displayed.
Notification that
modifying an
interconnect was
unsuccessful
31.10.2 Interconnect modules are in Maintenance state
Possible cause and recommendation Symptom
There is an OA credential caching issue if interconnect modules report their state as
Maintenance
.
If interconnect modules are in a Maintenance state:
You have to re-add the enclosure.
1. From the main menu, select Enclosures →Add.
2. Provide the enclosure information (IP/FQDN, Administrator account and password), and
click the Add button.
This will initiate rediscovery of the enclosure and its components.
Interconnect modules
are in a Maintenance
state
31.10 Troubleshooting interconnects 245