8 learning more – HP OneView User Manual
Page 162
•
The NTP default polling interval is set to 8 hours.
•
An appliance certificate is installed to enable single sign-on operations.
•
Enclosure firmware management is disabled.
•
The OA firmware is updated to minimum firmware levels, listed in the
.
•
The server hardware iLO time zone is set to Atlantic/Reykjavik as recommended in the
iLO documentation.
The time zone setting determines how the server hardware iLO adjusts UTC (Coordinated
Universal Time) time to obtain the local time, and how it adjusts for daylight saving time
(summer time). For the entries in the iLO event log and IML to display the correct local time,
you must specify the time zone in which the server is located.
If you want iLO to use the time provided by the NTP server, without adjustment, configure the
iLO to use a time zone that does not apply an adjustment to UTC time. In addition, that time
zone must not apply a daylight saving time (summer time) adjustment.
There are several time zones that meet this requirement. One example is the
Atlantic/Reykjavik
time zone. This time zone is neither east nor west of the prime
meridian and time does not change in the spring or fall.
20.8 Learning more
•
“Understanding the resource model” (page 31)
•
“Managing licenses” (page 131)
•
“Troubleshooting enclosures and enclosures groups” (page 241)
162
Managing enclosures and enclosure groups