HP XP Array Manager Software - Manual (Page 55)

Changing settings for a manually registered host
You can use Edit Hosts to update host information registered by specifying WWN, or registered by
using the host detection function.
1. On the Administration tab, select Managed Resources.
2. On the Hosts tab, select the host to change, and click Edit Hosts.
3. Specify the required items, and then click OK.
The host information is updated.
Related topics
• About changing host settings and information , page 52
Changing settings for a host registered by using Device Manager agent
When the Device Manager agent is used, host information is periodically sent from the Device Manager
agent. To update displayed host information, use the Refresh Hosts button. Additionally, after changing
settings on the Edit Hosts dialog box, depending on which settings you changed, it may be necessary
to use Refresh Hosts to update host information.
To make changes or update host information to each item, see the following table:
Table 4 Updating host information using Device Manager agent
Edit Hosts Refresh Hosts Item
Y
1 N Host Name
N Y OS Type
N Y IP Address
N N User ID/PW
Y
2
Y
2 Port Type
Y
2,3
Y
2 WWN
N N
4 WWN Nickname
User Guide 55