Disabling pop-up blocking for ie – HP XP Array Manager Software User Manual
Page 23
After logging in to HP XP7 Command View Advanced Edition, before you can start other XP7 Command
View AE products, such as Replication Manager, the host name of the management server must be
set so that it can be resolved to the IP address. If the name cannot be resolved, an attempt to start
another XP7 Command View AE product will fail.
•
Verify whether the management server on which products such as the Device Manager server or
Replication Manager server are installed can be accessed by using the host name.
NOTE:
If you are having issues with general access, or with using a component of HP XP7 Command
View Advanced Edition, first make sure the problem is not related to the management server,
or related to networking.
For troubleshooting problems related to Device Manager servers, see the
HP XP7 Command
View Advanced Edition Administrator Guide.
Related topics
• About configuring browser settings
Disabling pop-up blocking for IE
You can disable pop-up blocking, or configure URLs, so that XP7 Command View AE can display all
windows.
If you are using XP7 Command View AE on a browser for which pop-up blocking is enabled, you
must disable pop-up blocking.
Alternatively, you can register the URLs of XP7 Command View AE products and the IP address or
host name of SVP as allowed sites.
If SSL or TLS is being used for communication between the management server and the management
client, also register the URLs for SSL communication in the pop-up blocker settings.
Prerequisites
The IP address or host name of the Device Manager server
TIP:
For Internet Explorer, in When a pop-up is encountered, select a radio button other than
Always open pop-ups in a new tab, or the pop-up might be displayed behind another window. If
you receive a pop-up blocked warning message, you can unblock pop-ups so that they will be
displayed at all times.
1.
Start Internet Explorer.
2.
From the Tools menu, select Pop-up Blocker, then select Pop-up Blocker Settings.
3.
Add the URLs below to the Address of website to allow text box, and then click Add.
For SSL:
https://IP-address-or-host-name-of-the-Device-Manager-server
For non-SSL:
http://IP-address-or-host-name-of-the-Device-Manager-server
User Guide
23