1 overview of optional modules, 1 overview of internal customer units sk cu4, 1 overview of optional modules 3.1.1 – NORD Drivesystems BU0180 User Manual
Page 50
SK 180E Manual for frequency inverters
50
Pre-series version
BU 0180 GB-0914
3.1 Overview of optional modules
3.1.1
Overview of internal customer units SK CU4-
…
Internal customer interfaces enable the expansion of the range of functions of the frequency inverter without
changing its physical size. For example, either a field bus module or an I/O extension can be selected.
The frequency inverter provides one slot for the fitting of an appropriate option. External options (technology
units) are available for additionally required optional modules (Section 3.2.2).
The bus modules require an external 24 V supply. Therefore they are also available if the frequency inverter
is not supplied from the mains, but the 24 V supply to the module is active.
Bus modules
Type
Designation
Part Number
Document
CANopen
SK CU4-CAO
275 271 001
BU0260
DeviceNet
SK CU4-DEV
275 271 002
BU0280
PROFIBUS DP
SK CU4-PBR
275 271 000
BU0220
PROFINET IO
SK CU4-PNT
275 271 015
TI 275271015
EtherCAT
SK CU4-ECT
275 271 017
TI 275271017
POWERLINK
SK CU4-POL
275 271 018
TI 275271018
EtherNet/IP
SK CU4-EIP
275 271 019
TI 275271019
I/O extension
SK CU4-IOE
275 271 006
TI 275271006
Other modules
Type
Designation
Part Number
Document
Electronic brake rectifier
SK CU4-MBR
275 271 010
BU0180
Setpoint converter
SK CU4-REL
275 271 011
BU0180
Potentiometer
SK TIE4-POT
275 274 700
BU0180
Switch
SK TIE4-SWT
275 274 701
BU0180
Switch/potentiometer unit
SK CU4-POT
275 271 207
BU0180
NOTE
The Ethernet module (PROFINET IO, EtherCat, POWERLINK and EtherNet/IP) causes a
derating of the frequency inverter. For detailed information please refer to the data sheet
(TI ...) for the relevant module.