3 c-tick labeling, 4 rohs compliance – NORD Drivesystems BU0180 User Manual
Page 14
SK 180E Manual for frequency inverters
14
Pre-series version
BU 0180 GB-0914
cUL Approval - File No. E171342
“cUL only in combination with SK CIF-340-30 or SK CIF-340-60 for 380-480V models and
SK CIF-323-20 or SK CIF-323-40 for 3 phase 200-240V rat
ed models”. The recognized transi-
ent surge suppression filter board has to be connected between supply and the input of the
drive according to the instruction manual.
Remarks:
cUL approval for 110-120V models provided without filter board
“Suitable For Use On A Circuit Capable Of Delivering Not More Than 5000 rms Symmetrical Amperes, 120 Volts maxi-
mum (SK 1x0E-xxx-112), 240 Volts maximum (SK 1x0E-xxx-323) or 480 Volts maximum (SK 1x0E-xxx-340) and when
protected by RK5 class or faster fuses according to instruction manual chapter
“Suitable For Use On A Circuit Capable Of Delivering Not More Than 5000 rms Symmetrical Amperes, 120 Volts maxi-
mum (SK 1x0E-xxx-112), 240 Volts maximum (SK 1x0E-xxx-323) or 480 Volts maximum (SK 1x0E-xxx-340) and when
protected by Circuit Breaker (inverse time trip type) in accordance with UL
489”, current and voltage ratings according to
instruction manual chapter
1.5.3
C-Tick labeling
NORD frequency inverters fulfill all the relevant regulations in
Australia and New Zealand.
1.5.4
RoHS compliance
NORD frequency inverters are designed to be RoHS compliant according to Directive
2002/95/EEC.
N 23134